Spring Craft Calendar Event

February 18April 1

Quick Links To Info In This Post

I’m so excited to share 31 days of Spring faux leather crafts with you!

JUMP STRAIGHT TO THE PROJECTS

Here’s how it works. Each day beginning March 1st, 2026, I’m sharing a brand new faux leather Spring project with my audience via email at 9:00am ET.

If you aren’t already on my email list to receive the daily project reveals, you can join it here.

The daily project SVG will be available for purchase in my SVG shop at 50% off for 24 hours – after which time it will go back up to regular price.

All of the daily designs will be listed and linked on this page, just scroll down each day for all of the links.

If you don’t want to have to keep track of the daily drops and purchasing the SVG file during the 50% off window, you can grab the Spring Craft Calendar Pass which gives you lifetime access to all 31 days of event designs PLUS several Passholder perks!

LEARN MORE ABOUT THE CALENDAR PASS HERE

This page contains some affiliate links (which means if you make a purchase after clicking a link, I will earn a small commission at no additional cost to you). Read my full disclosure policy here.

Spring Craft Calendar Projects

DAY 31 – March 31st

Lemon Keychain

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy with the 12 inch long Joy mat
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- Use any faux leather you’d like. I used this Solid Yellow faux leather, this Yellow Gingham print, and this Siser Glitter HTV in Light Green
- For the print, I ordered a 9×12 sheet, Portrait Orientation, and Regular Scale.
Other Cricut Supplies
- Craft or fabric glue (like Beacon Fabri-Tac)
- 1 inch Wristlet Hardware with Nylon Jaw Pliers
- Faux Suede Tassels, I used 1.5 inch size (optional)
- 10mm Jump Rings
- Blue Painters Tape
- Purple Strong Grip Mat
- Green Standard Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Cricut EasyPress Mini
- EasyPress Mat, 8×10 size

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DAY 30 – March 30th

Easter Basket Tags

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy with the 12 inch long Joy mat
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- Use any smooth faux leather you’d like. I used this pastel checkerboard print, this plaid print, and this egg and bunny print.
- For the HTV I used Siser Easyweed in Lavender, Bubble Gum Pink, Sea Glass and White.
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Green Standard Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Cricut EasyPress Mini
- EasyPress Mat, 8×10 size

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DAY 29 – March 29th

Flower Mini Coin Purse

This project SVG is available to purchase in my SVG shop

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra
Not Compatible Machines❌: Cricut Joy
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- I used this plaid and this polka dot print but you can use whatever you’d like! I ordered a 9×12 sheet, Regular Scale, Portrait Orientation.
Other Project Supplies
- For the Flower center: 8mm Enamel Center Rivets (includes rivet tools)
- For the purse: 6mm x 6mm Rivets (includes rivet tools)
- Hammer
- Fabric or craft glue – I used Beacon Fabri-Tac
- Size 20 Kam Snaps with Kam Snap Pliers
- Lobster Claw Keychain Clasps
- 10mm Jump Rings
- Faux Suede Tassels (optional)
- Charms (optional)
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DAY 28 – March 28th

Butterfly Magnetic Bookmark

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- You can use any faux leather and HTV you’d like!
- Faux Leather: I used this solid peach faux leather.
- Heat Transfer Vinyl: I used Teckwrap Craft Metallic Heat Transfer Vinyl in Gold.
Other Project Supplies
- Fabric or Craft Glue to glue the faux leather pieces together – I used Beacon Fabri-Tac
- Fast drying gel super glue to glue the magnets in – I used Gorilla Super Glue Gel XL but you could also use Loctite Super Glue Ultra Gel Control
- Thin Magnets – I used these that are 20mm wide and 2mm thick
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Green Standard Grip Mat
- Cricut EasyPress Mini
- Cricut EasyPress Mat, 8×10
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DAY 27 – March 27th

Flower Badge Reel

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- You can use any faux leather you’d like. I bought 9×12 inch size, Portrait Orientation, Regular Scaling for all prints below.
  - Large Polka Dot Prints: Purple Watercolor Dots, Pink Watercolor Dots, Blue Watercolor Dots
  - Small Polka Dot Prints: Purple Dots, Pink Dots, Blue Dots
  - Solids: Lavender, Pink, Light Blue
  - Flower Centers: I used Siser Glitter HTV in Lemon Sugar but you could also use faux leather for the center. I recommend this faux leather for a yellow flower center: Banana Light Yellow Solid
Other Project Supplies
- Fast drying gel super glue – I used Gorilla Super Glue Gel XL but you could also use Loctite Super Glue Ultra Gel Control
- Badge Reel blanks like these in White or these in Clear
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Green Standard Grip Mat
- Cricut EasyPress Mini
- Cricut EasyPress Mat, 8×10
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DAY 26 – March 26th

Flower Name Keychain

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy (with the 12 inch long Joy mat)
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- You can use any faux leather you’d like. I bought 9×12 inch size, Portrait Orientation, Regular Scaling for all prints below.
  - I used this Small Tulip Floral Print and this small Daisy print for the straps and this solid peach and this blue polka dot for the flowers.
  - I used Siser Easyweed in Melon and Siser Easyweed in SeaGlass.
Other Project Supplies
- Swivel Snap Hook Keychain Hardware
- 6mm x 6mm rivets (includes rivet tools)
- Hammer (any old hammer will do!)
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Green Standard Grip Mat
- Cricut EasyPress Mini
- Cricut EasyPress Mat, 8×10
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DAY 25 – March 25th

Spring Bow Planner Clips

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- You can use any faux leather you’d like. I bought 9×12 inch size, Portrait Orientation, Regular Scaling for all prints below.
Other Project Supplies
- Hot Glue Gun & Glue Sticks – I used the Surebonder Mini Glue Gun and Gorilla Glue Mini Glue Sticks. You could also use a gel formula super glue like Loctite Super Glue Gel Control
- Oversized Paper Clips like these
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DAY 24 – March 24th

Fruit Slice Cord Keeper

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- Use any faux leather you’d like! I used:
Other Project Supplies
- Fabric or Craft Glue – I used Beacon Fabri-Tac
- Swivel Snap Lobster Claw Keychain Clips
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Green Standard Grip Mat
- Cricut EasyPress Mini
- Cricut EasyPress Mat, 8×10 size
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DAY 23 – March 23rd

Layered Flower Bookmark

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy (with the 12 inch long mat)
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather
- Use any faux leather you’d like! I used:
  - Rivet mark – This striped faux leather for the base, this blue dot, this pink dot, and this solid yellow.
  - Glued bookmark – This floral print for the base, this solid pink, this pink dot, this solid peach, this solid yellow.
  - For the prints, I ordered a 9×12 sheet, Regular Scale, Portrait Orientation.
Other Project Supplies
- Fabric or Craft Glue – I used Beacon Fabri-Tac
- Rivets: 6mm x 6mm Rivets (includes rivet tools) and a hammer
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DAY 22 – March 22nd

Bunny Tail Earrings

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather
- I used this Purple Watercolor Dots print for the bunny body and this white solid faux leather for the tail. For the print, I ordered a 9×12 sheet, Regular Scale, Portrait Orientation.
- You can use heat transfer vinyl for the tail instead of faux leather, too! If I had used heat transfer vinyl, I would have used Siser White Glitter HTV.
Other Project Supplies
- Fabric or Craft Glue – I used Beacon Fabri-Tac
- Earring Hooks in Silver or Gold finish
- 6mm Jump Rings in Silver or Gold finish
- Jewelry Pliers – Chain Nose and/or Flat Nose
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DAY 21 – March 21th

Stacked Butterfly Bag Tag

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy with the 12 inch long Joy mat
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather
- Back layer – this pink solid
- Peach butterfly – this peach solid for the bottom layer, this grid print for the top layer
- Green butterfly – this mint green solid for the bottom layer, this green plaid for the top layer
- Blue butterfly – this blue solid for the bottom layer, this blue dot for the top layer
- Purple butterfly – this lavender solid for the bottom layer, this purple dot for the top layer
Other Project Supplies
- Carabiner Keyring or other keyring hardware
- Rivets: 6mm x 6mm Rivets (includes rivet tools) and a hammer
- Fabric or Craft Glue – I used Beacon Fabri-Tac
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Faux Leather Spring Coffee Cup Sleeve made with a Cricut

DAY 20 – March 20th

Hello Spring Coffee Cup Sleeve

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy with the 12 inch long Joy mat
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- Use any smooth faux leather you’d like. I used this green gingham print faux leather. I ordered a 9×12 sheet with Portrait Orientation and Regular Scaling.
- Use any HTV you’d like. I used Siser Easyweed in Lavender, Lemon Yellow, and Bubblegum Pink.
Other Project Supplies
- Size 20 Kam Snaps with Kam Snap Pliers
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Green Standard Grip Mat
- Small Curved Scissors
- Cricut EasyPress Mini
- Cricut EasyPress Mat
- Teflon Sheet
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Faux Leather Daisy Lip Balm Holder made with a Cricut

DAY 19 – March 19th

Daisy Lip Balm Holder

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy with the 12 inch long Joy mat
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather
- I used this Daisies print and this white solid faux leather, but you can use whatever you’d like! I ordered a 9×12 sheet, Regular Scale, Portrait Orientation.
Other Project Supplies
- For the Flower center: 8mm Enamel Center Rivets (includes rivet tools)
- For the holder: 6mm x 6mm Rivets (includes rivet tools)
- Hammer
- Size 20 Kam Snaps with Kam Snap Pliers
- Lobster Claw Keychain Clasps
- 10mm Jump Rings
- Faux Suede Tassels (optional)
- Charms (optional)
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Faux Leather Butterfly Keychains made with a Cricut

DAY 18 – March 18th

Butterfly Keychain

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
Pink – this solid pink faux leather and Siser Easyweed HTV in Bubble Gum Pink.
Peach – this solid peach faux leather and Siser Easyweed HTV in Melon.
Yellow – this solid light yellow faux leather and Siser Easyweed HTV in Yellow.
Green – this solid mint green faux leather and Siser Easyweed HTV in Sage.
Blue – this solid light blue faux leather and Siser Easyweed in Sea Glass.
Lavender – this light purple faux leather and Siser Easyweed in Lavender.
Other Project Supplies
- Fabric Glue like Beacon Fabri-Tac
- 3/16″ Grommets like these (I got the Macaron color set)
- Colorful 4 inch Ball Keychains
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Cricut EasyPress Mini
- Cricut EasyPress Mat
- Teflon Sheet
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Spring Bunny Purse Charm made with a Cricut

DAY 17 – March 17th

Spring Bunny Purse Charm

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy with the 12 inch long Joy mat
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
Use any smooth faux leather you’d like. I used this solid pink and this paster gingham print. I ordered both in 9×12 sheet size and Portrait Orientation. For the print I ordered Regular Scale.
For the HTV I used Cricut Foil Iron On in Rose Gold.
Other Project Supplies
- Fabric Glue like Beacon Fabri-Tac
- Ribbon (optional) – I used this 3/8 inch gingham ribbon from Michaels
- Charm (optional) – I used these Flower Charms (these Flower Charms are nice, too)
- Jewelry Pliers like these Flat Nose Pliers & these Chain Nose Pliers
- 10mm Jump Rings
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Cricut EasyPress Mini
- Cricut EasyPress Mat
- Teflon Sheet
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Spring Post-In Note Holder made with a Cricut

DAY 16 – March 16th

Watermelon Post-It Note Holder

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy with the 12 inch long Joy mat
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
You can use any faux leather you’d like as long as it’s smooth. I used this Green Plaid. I bought 9×12 inch size, Portrait Orientation, and Regular Scale.
Use any HTV you’d like for the watermelon. I used Siser Easyweed in White, Dark Green and Black and Siser Glitter in Rainbow Coral.
Other Project Supplies
- Fabric Glue like Beacon Fabri-Tac
- Size 20 Kam Snaps
- Kam Snap Pliers. Comes in the set linked above or sold separately here.
- 3×3 inch Post-It Notes or Sticky Notes like these
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Cricut EasyPress Mini
- Cricut EasyPress Mat
- Teflon Sheet
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DIY Cricut Butterfly and Flower Planner Clips

DAY 15 – March 15th

Butterfly & Flower Planner Clips

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
I bought 9×12 inch size, Portrait Orientation, and Regular Scale for all prints below, but Tiny Scale would work well too since these are so small.
- Pink Flower: Cotton Candy Pink Dots
- Striped Butterfly: Top layer, Pastel Easter Stripes, Bottom Layer, Yellow White Daisies
- Gingham Butterfly: Top layer, Green Plaid, Bottom Layer, Peeps & Stars Plaid
- Blue Flower: Cotton Candy Blue Dots
Other Project Supplies
- Fabric Glue like Beacon Fabri-Tac
- Jumbo Paper Clips (50mm size)
- 6mm Rivets (this set includes the rivet tools)
- Hammer (I got this cute pink one on Amazon)
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Faux Leather Pickleball Keychain made with a Cricut

DAY 14 – March 14th

Pickleball Keychain

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy (with the 12 inch long Joy mat)
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- Use any smooth faux leather you’d like. I used this solid white from The Polka Dotted Peach.
- Use any easy to weed heat transfer vinyl you’d like. I used Siser Glitter HTV in Neon Yellow for the pickleball itself and Siser Easyweed in Hibiscus, Melon, and Light Pink for the paddle.
Other Project Supplies
- Fabric Glue like Beacon Fabri-Tac
- Split Ring Keyring (I like the 30mm size)
- 10mm jump rings
- Faux Suede Tassels (these are 1.5″ long)
- Flat Nose Jewelry Pliers
- Chain Nose Jewelry Pliers
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

faux leather Easter wristlets

DAY 13 – March 13th

Easter Wristlets

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy (with the 12 inch long Joy mat)
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- I used this Easter Egg print and this Cross print.
- I also used solid Peach, solid Light Pink, this Purple Polka Dot and this Pink Gingham print.
- For all of the prints I ordered 9×12 sheets, Regular Scale, Portrait Orientation.
Other Project Supplies
- 6mm x 6mm Rivets (includes rivet tools) and a hammer
- 1 inch wristlet hardware with nylon jaw pliers
- 10mm jump rings
- Faux Suede Tassels (I used the 2 1/4″ ones)
- Fabric Glue like Beacon Fabri-Tac
- Flat Nose Jewelry Pliers
- Chain Nose Jewelry Pliers
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Faux Leather Spring Notebook Cover made with a Cricut

DAY 12 – March 12th

Butterfly Garden Notebook Cover

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra
Not Compatible Machines❌: Cricut Joy
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- Use any smooth faux leather you’d like. I used this Cotton Candy Blue Dots faux leather. I ordered a 9×12 sheet with Portrait Orientation and Regular Scaling.
- Use any HTV you’d like. I used Siser Easyweed in White.
Other Project Supplies
- Size 20 Kam Snaps
- Kam Snap Pliers, included in the set above, or sold separately here.
- 2mm Elastic Cord
- 3.5×5.5″ notebook inserts – I used these pretty ombre cover ones, but I also like these
- 10mm jump rings
- Assorted charms like these flower charms, and these flower charms, these butterfly charms (or these butterfly charms) and these bow charms (all linked in my Amazon storefront here)
- Flat Nose Jewelry Pliers
- Chain Nose Jewelry Pliers
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Faux Leather Sweet Bunny Bookmarks made with a Cricut

DAY 11 – March 11th

Sweet Bunny Bookmarks

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- Use any smooth faux leather you’d like. Use a solid pastel color if you are only using faux leather (and no glitter heat transfer vinyl). I love these solids from The Polka Dotted Peach. Or if you are covering the faux leather with glitter HTV, you can use any color faux leather as the base.
- Use any HTV you’d like. I used Siser Easyweed in Black for the eyes and Siser Glitter in Neon Pink, Lemon Sugar, Jade Green, Neon Blue and Neon Purple (all linked in my Amazon storefront here).
Other Project Supplies
- Magnetic Bookmarks like these
- Craft glue like Bearly Art Glue
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

faux leather mini flower keychains made with a Cricut

DAY 10 – March 10th

Mini Flower Keychain

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather
- Use any faux leather you’d like! I bought 9×12 inch size, Portrait Orientation, Regular Scaling for all prints below.
- Dotted Prints: Purple Watercolor Dots, Pink Watercolor Dots, Green Watercolor Dots
- Solids: Lavender, Pink, Mint Green
- Flower Centers: Banana Light Yellow Solid
Other Project Supplies
- Craft or fabric glue like Beacon Fabri-Tac or Bearly Art Glue
- Swivel Snap Lobster Claw Keychain Clips or the keyring of your choice
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

faux leather clover charm bracelet

DAY 9 – March 9th

Clover Charm Bracelet

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather
- Use any faux leather you’d like! I bought 9×12 inch size, Portrait Orientation, Regular Scaling for all prints below.
- I used this Green Easter Dots print, this St. Patrick’s Day Checkers print, this solid dark green, and this solid light green. If you love the print and green print I used (the checkers print) see all of the cute matching faux leather prints in this set here.
Other Project Supplies
- Craft or fabric glue like Bearly Art Glue (recommended for this project for the precision tip nozzle) or Beacon Fabri-Tac
- Jewelry Making Pliers (Baby Wubbers Chain Nose and Baby Wubbers Flat Nose are my favorites)
- 10mm Jump Rings
- Bulk Chain like this one (textured) or this set of 4 spools in different metal finishes
- Toggle Clasps
- Charms (optional) like these white enamel hearts or these St. Patrick’s Day charms
- 1/16″ Hole Punch (optional)
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Faux Leather Bird Charm made with a Cricut

DAY 8 – March 8th

Patchwork Bird Charm

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy (with the 12 inch Joy mat)
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather
- Use any faux leather you’d like! I bought 9×12 inch size, Portrait Orientation, Regular Scaling for all prints below.
- Body: Wildflower Watercolor
- Chest: Green Plaid Print
- Beak: Banana Light Yellow Solid
- Bottom Wing: Purple Watercolor Dots
- Top Wing: Cotton Candy Purple Dots
Other Project Supplies
- Craft or fabric glue like Beacon Fabri-Tac)
- Rivets for the eye (or you can use faux leather/HTV instead) – I used these crystal ones but you can use these 6mm x 6mm metal ones, too. You’ll need rivet tools and a hammer. The 6mm metal rivet package comes with the tools you need but the crystal ones are sold without any tools.
- Colored O-Ring carabiner clips (33mm) or 30mm Split Ring Keyrings
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Layered Faux Leather Butterfly Earrings made with a Cricut

DAY 7 – March 7th

Layered Butterfly Keychain

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

BONUS VIDEO TUTORIAL

WRITTEN TUTORIAL

WATCH INSTAGRAM REEL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Explore 5, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather
- Use any faux leather you’d like! I bought 9×12 inch size, Portrait Orientation, Regular Scaling for all prints below.
- Left Keychain, top to bottom:
  - Peach Solid, Orange Plaid Print, Sweet Spring Flower Print
- Middle Keychain, top to bottom:
  - Penelope Butterfly Floral Print, Cotton Candy Pink Dots Print, Green Plaid Print
- Right Keychain, top to bottom:
  - Pink Solid, Baby Blue Dashes Print, Pastel Bunnies Plaid Print
Other Project Supplies
- Craft or fabric glue like Beacon Fabri-Tac)
- 8mm enamel rivets or and hammer (or craft or fabric glue like Beacon Fabri-Tac)
- Large Lobster Claw Clasp Keychains or these with the clasp for hanging charms and tassels
- Spring Charms like these Flower Charms or these Flower Charms – also these Butterfly Charms (these Butterfly Charms are pretty, too!)
- Jewelry Making Pliers (Baby Wubbers Chain Nose and Baby Wubbers Flat Nose are my favorites)
- 10mm Jump Rings
- Faux Suede Tassels
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DIY Cricut Faux Leather Rose Card Wallet

DAY 6 – March 6th

Rose Card Wallet

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

WATCH INSTAGRAM REEL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra
Not Compatible Machines❌: Cricut Joy
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- Use any smooth faux leather you’d like. I used this Pink Gingham faux leather. I ordered a 9×12 sheet with Portrait Orientation and Regular Scaling.
- Use any HTV you’d like. I used Siser Easyweed in Light Pink and Siser Glitter HTV in Blush.
Other Project Supplies
- Size 20 Kam Snaps, EXTRA LONG or a combination of EXTRA LONG and REGULAR length. See the tutorial for more info.
- Kam Snap Pliers. Sold in this set of Size 20 REGULAR LENGTH Kam Snaps, or separately here.
Other Cricut Supplies
- Blue Painters Tape
- Fabric or Craft Glue like Beacon Fabri-Tac
- Purple Strong Grip Mat
- Green Standard Grip Mat
- Teflon Sheets
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Cricut EasyPress Mini
- EasyPress Mat, 8×10 size

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Faux Leather Dragonfly Bookmark made with a Cricut

DAY 5 – March 5th

Dragonfly Bookmark

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

WRITTEN TUTORIAL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather & Heat Transfer Vinyl
- Use any smooth faux leather and easy to weed HTV you’d like. I used this solid peach faux leather and Siser Easyweed HTV in Melon.
- For the optional HTV on the back of the faux leather, use a thin HTV so the Cricut will be able to cut through it when it’s pressed onto the back of the faux leather. I used Cricut Foil Iron On in Rose Gold.
Other Project Supplies
- Bookmark Tassels
Other Cricut Supplies
- Blue Painters Tape
- Purple Strong Grip Mat
- Green Standard Grip Mat
- Teflon Sheets
- Small Curved Scissors
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Cricut EasyPress Mini
- EasyPress Mat, 8×10 size

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Faux Leather Mini Basket made with a Cricut

DAY 4 – March 4th

Square Mini Basket

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

WATCH INSTAGRAM REEL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra
Not Compatible Machines❌: Cricut Joy
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather
- I used this Pretty Spring Blossom print and this Blue Tiny Dash print. For both sheets I ordered 9×12 sheets, Regular Print, Portrait Orientation.
Other Project Supplies
- For the rivets version: 6mm x 6mm Rivets (includes rivet tools) and a hammer
- Fabric or Craft Glue – I used Beacon Fabri-Tac
- Ribbon (optional) – I used this 3/8 inch gingham ribbon from Michaels
Other Cricut Supplies
- Blue Painters Tape
- Small Curved Scissors
- Purple Strong Grip Mat
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

Faux Leather Tulip Earrings made with a Cricut

DAY 3 – March 3rd

Tulip Earrings

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

WATCH INSTAGRAM REEL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather
- For the earrings on the left, I used (from top to bottom): Tulip print, Pink solid, Baby Blue White Dashes print.
- For the earrings on the right, I used (from top to bottom): Plaid print, Lavender solid, Purple Watercolor Dots print.
- For both prints I ordered 9×12 sheets, Regular Print, Portrait Orientation.
Other Project Supplies
- Earring Hooks in Silver or Gold finish
- 6mm Jump Rings in Silver or Gold finish
- Jewelry Pliers – Chain Nose and/or Flat Nose
Other Cricut Supplies
- Blue Painters Tape
- Small Curved Scissors
- Purple Strong Grip Mat
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

faux leather shamrock purse charm made with a Cricut

DAY 2 – March 2nd

Layered Shamrock Purse Charm

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

WATCH INSTAGRAM REEL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra, Cricut Joy (with the 12″ long Joy mat)
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather
- You can use any faux leather you’d like! I used this Green Easter Dots print, this St. Patrick’s Day Checkers print, and this solid green, all from The Polka Dotted Peach. For both prints I ordered 9×12 sheets, Regular Print, Portrait Orientation.
Other Project Supplies
- 6mm x 6mm Rivets (includes rivet tools) and a hammer
Other Cricut Supplies
- Blue Painters Tape
- Small Curved Scissors
- Purple Strong Grip Mat
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

DAY 1 – March 1st

Flower Cord Keepers

This project SVG is available to purchase in my SVG shop.

Or you get it and all 31 days of event designs for one low price in the Spring Craft Calendar Pass.

WRITTEN TUTORIAL

WATCH INSTAGRAM REEL

Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra, Cricut Joy
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure

Faux Leather
- I used Pink Dots & Pink Gingham from this set – also these Purple Dots & Gingham from this set. For both sets I ordered 9×12 sheets, Regular Print, Portrait Orientation.
Other Project Supplies
- Kam Snaps, Size 20, with Kam Snap Pliers
- For the rivets version: 6mm x 6mm Rivets (includes rivet tools) and a hammer
- For the glued version: fabric or craft glue (I used Beacon Fabri-Tac) and heat transfer vinyl for flower center. I used Siser Glitter HTV in Lemon Sugar.
Other Cricut Supplies
- Blue Painters Tape
- Small Curved Scissors
- Teflon Sheets
- Purple Strong Grip Mat
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Cricut EasyPress Mini
- EasyPress Mat, 8×10 size

🛒To shop the supplies I used for this project in my Amazon storefront, click here.

6 Comments

Barbara says:

at

Love this project!!!

Reply
Kay Williams says:

at

I love being in this group of wonderful people! Amy is the best teacher and I love all of her designs!💜💜🦋🦋

Reply
1. Wanda Gassaway says:
  
  at
  
  I love being in this group, and Amy is the best teacher i love all of her crafts.
  
  Reply
Bonnie Edwards says:

at

I just love it when Amy does her leather projects, I love making them along beside her. I love being in this group too seeing all what everyone has made. Great job everyone, Amy don’t stop you are my inspiration. Can’t wait for the next one.

Reply
Tara says:

at

The designs get cuter and cuter every day! I am so impressed that you came up with so many unique and adorable projects for this event! I can’t wait to make some of them.

Reply
grace says:

at

I really enjoyed being in this group. Every morning at 9AM I turned on my computer to see what surprise was in store for the day. So many of you made each and every project and every one of them were so cute! I didn’t have time to do all the projects, but the ones that I did do, I loved how they came out. I will get back to the ones that I wanted to make but couldn’t yet. That’s one of the great things about buying the pass, you have time to go back and create what you missed. I am thinking about joining the club, but I don’t have a need for the earrings as my girls just aren’t into them and I know those are a big part of her items. Any of you a club member and have a suggestion or two? Is it worth it, if making earrings is out of the equation? Thanks for listening. Have a blessed day and happy crafting.

Reply

Leave a Reply Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.