Faux Leather Angel Earrings Made with a Cricut
There’s something so magical and beautiful about Angel imagery at Christmastime. I love how calming and beautiful they are. I knew I wanted to make Faux Leather Angel Earrings with my Cricut, and I wanted the angels to shimmer and glow. It took some time to get the lacey filigree of the wings and the tiny halo right, but I think I achieved the look I was gong for with these Faux Leather Angel Earrings.
They are so easy to make with faux leather and heat transfer vinyl. You can make them with a Cricut Maker, Maker 3, Explore Air 2 or Explore 3, or even the Cricut Joy.
This SVG is included in my Christmas Earrings Event SVG Bundle – you can learn more and get it here.
I also have the earring SVG template for sale individually in my shop – the link is in the Materials section below.
So if you’re ready to try making these Faux Leather Angel Earrings with a Cricut, let’s get started!
This page contains some affiliate links (which means if you make a purchase after clicking a link, I will earn a small commission at no additional cost to you). Read my full disclosure policy here.
CRICUT FAUX LEATHER ANGEL EARRINGS MATERIALS LIST
- Smooth Faux Leather in Pink
- Heat Transfer Vinyl in Glitter White and Glitter Old Gold (I used Siser brand)
- Cricut Foil Iron-On in Light Gold
- This SVG is part of my 25 Days of Cricut Christmas Earrings Event. To see all of the earring designs included in this event, click here.
- Get the earring templates from my shop here. If you’d like to sell earrings made from my earrings SVG templates, there are commercial use license options available at this link, too.
- Cricut machine of your choice: Cricut Maker 3, Cricut Maker, Cricut Explore 3, Cricut Explore Air 2, or the Cricut Joy
- Purple “Strong Grip” cutting mat
- Green “Standard Grip” cutting mat
- Blue Painter’s Tape
- Cricut EasyPress Mini
- Cricut EasyPress Mat, 8×10 size
- Teflon Sheets (I trim mine down to a smaller size)
- Cricut Weeding Tool (I use the one from this basic tool set)
- 1/16″ Hole Punch
- Jewelry Pliers – Needle Nose and Wide Flat Nose
- Earring hooks in Silver finish and Gold finish
- 6mm Jump Rings in Silver finish and Gold finish
How to Make Faux Leather Angel Earrings with a Cricut
For a printable version of the text portion of project instructions, click here.
STEP 1 – Get the Earrings SVG Template
You can get the Angel Earrings SVG templates as part of the Christmas Earrings Event Bundle here or from my shop here. You’ll receive an order confirmation email with a link to download the SVG after purchasing.
Save the zipped folder that downloads to your computer. You’ll need to unzip or extract the folder FIRST so you can upload the Angel Earrings SVG file to Cricut Design Space.
STEP 2 – Upload The Earrings SVG Template to Cricut Design Space
Click on Upload Image, then browse to where your unzipped file SVG is located on your device.
Click on it to upload it to Design Space. You’ll see a preview of the Angel Earrings SVG on the screen. Click the UPLOAD button.
Then select the SVG from your Recent Uploads row and click Add to Canvas.
There will be two versions of each of the earring SVGs – one with pre-cut holes and one without. Decide which version you want to use and delete the other ones. You will need to ungroup both versions from each other first before you can delete.
I suggest using the “no-holes” version if you want to change the size of the earrings or if you prefer making the holes manually using a hole punch. If you use the “with holes” version, you can always finish making the earring hole with a hole punch if the Cricut doesn’t cut the hole completely.
I have a YouTube video all about earring holes if you want more information about faux leather earring holes or you need help deciding which version you want to use.
I don’t recommend sizing these earrings any smaller. The halo is tiny and the wings have a delicate swirl design that will be very difficult to weed if it was any smaller.
If you want to make gift tags, ornaments, stocking tags, or any other items like that, you’ll want to use the “without holes” version and punch the hole manually.
Click the green “Make It” button.
STEP 3 – Prepare to Cut Earring Shapes in Cricut Design Space
When Design Space prompts you to choose how you will load your materials for this project, choose “On Mat.”
See the graphics below to know which layer will cut from what material.
For this project, I used light pink faux leather for Layer #1, Cricut Foil-Iron On in Light Gold for Layer #2, White Glitter Heat Transfer Vinyl for Layer #3, and Old Gold Glitter Heat Transfer Vinyl for Layer #4.
The mat preview screen will show all the mats for this faux leather earrings project, separated by color on the left hand side.
You’ll notice there are two “gold” colored mats, but they are on separate mats. That’s because I’m cutting these two gold parts of the design from different materials, so they need to be on different mats. By making them different colors, Cricut Design Space places them on different cutting mats.
Click on each mat in the mat preview screen. First, toggle the MIRROR toggle to ON for each mat.
This is because faux leather and heat transfer vinyl cut face down. (If you are using permanent vinyl instead of heat transfer vinyl, don’t mirror the mats you plan to cut from permanent vinyl).
Then click and drag the shapes apart from each other just slightly.
For the tiny halo shapes, drag them apart further, leaving ample space between the two shapes. This will make it easier for you to press these shapes onto the faux leather without leaving clear transfer sheet impressions in the faux leather.
This is how far apart I spaced my halos. I put one in each one inch grid square.
Then click back on the faux leather mat to select it. Click the green CONTINUE button to make the first material selection.
STEP 4 – Make Material Selections
Note for Explore Air 2 users: Cricut Explore Air 2 users will need to turn the dial to “Custom” before choosing Faux Leather (Paper Thin).
Note for Cricut Joy users: Cricut Joy users should check out my tutorial on How to Make Earrings with the Cricut Joy with more specific instructions for Joy users.
I always cut the faux leather mat first.
On the Material Selection screen, choose Faux Leather (Paper Thin) as the material setting. If you don’t have this material setting as a favorite, click “Browse All Materials” to search for it and select it.
Then select “More” from the Pressure dropdown menu.
Now it’s time to prepare the faux leather mat to cut.
STEP 5 – Cut the Faux Leather Mat
NOTE: I didn’t put a backing on these faux leather earrings in this tutorial to keep it as short as possible. But I do have a post here and a YouTube video here that demonstrate four ways to put a back on faux leather earrings if you want to learn more.
Cut a piece of faux leather just slightly larger than the size shown in the mat preview screen.
Place it pretty side down on a sticky purple cutting mat in the same location shown in the mat preview screen.
Tape the faux leather down on all sides with blue painter’s tape.
Make sure the white “star wheels” on the roller bar are pushed off to the side so the wheels don’t make indentations in your material.
Load the mat into the Cricut by lining up the mat with the guides and pressing the double arrows button. The machine will pull the mat into the machine.
Press the C button to begin the cut.
After the cut is complete and before unloading the mat, use a weeding tool to carefully lift the edge of the faux leather shape to see if the cut was complete.
If not, press the C button again to repeat the cut.
Unload the mat and remove the earring shapes. You can trim any stray fuzz with small curved scissors.
Use a sharp weeding tool to poke through the earring holes. If they didn’t cut completely, use a 1/16″ hole punch to punch the earring holes.
If you want to color the white edges of the faux leather to match the color of the front of the material, you can use a color coordinated Sharpie marker to color the edges.
STEP 6 – Cut the Vinyl Mats
Next, cut the vinyl mats. In Cricut Design Space, on the left hand mat preview, click on the vinyl mat of your choice. I’ll cut the white glitter angel body shape layer first. Make sure the MIRROR toggle is on.
I’m using glitter white heat transfer vinyl, but you can use whatever kind of vinyl you’d like to.
You can use your mouse to hover over the mat to make a note of the size vinyl you need to cut out the shapes completely. I like to use a small piece of vinyl trimmed just larger than the shapes that need to cut.
Reminder: if you are using heat transfer vinyl, be sure the MIRROR toggle is turned on. For permanent vinyl, leave MIRROR off.
Choose your material setting according to the vinyl type you are using. I use the “Glitter Vinyl” setting with “default” pressure for glitter heat transfer vinyl.
Place the first heat transfer vinyl you plan to cut shiny side down on a green standard grip cutting mat in the location shown on the mat preview screen.
Load the green mat into the Cricut and press the C button to begin the cut.
NOTE: If you are using Siser Glitter heat transfer vinyl for any of your layers, I recommend repeating the cut once by pressing the C button again before unloading the mat.
When the cut is complete, unload the mat and weed away the excess vinyl using a weeding tool.
Return to Cricut Design Space to cut the other vinyl mats. Use the material setting that best corresponds to the material you are cutting.
For the Wings, I used the Foil Iron-On setting with default pressure.
For the glitter gold halo, I used the Glitter Vinyl setting with Default pressure and repeated the cut one time.
Weed away the excess vinyl on the halo and wing layers. Cut all of the vinyl shapes apart from each other.
For the small halos, be sure not to trim the clear cover sheet too close to the halo shape. Leave as much clear cover sheet as you can around the halo shape so the trimmed edge doesn’t leave an indentation in the faux leather when you press.
STEP 7 – Press the Vinyl Layers to the Faux Leather Earring Shapes
I press vinyl to faux leather using a Cricut EasyPress Mini on the “low” setting (one green bar). You can also use a traditional EasyPress set to 255-265 degrees.
Refer back to the Layering Guides earlier in this post for a refresher on which layers are pressed in which order.
You’ll need a heat pressing pad or folded towel to protect your surface, as well as a cover sheet of some kind to put between the heat and your materials. You can use a piece of parchment paper, butcher paper, or a Teflon sheet.
Place the faux leather shape on the pressing pad and layer the first vinyl on top. There is a very tiny pink border that should be visible outside of the wings.
Cover with a cover sheet and press for 7-10 seconds. You can move the EasyPress Mini around like an iron if you’d like to.
After 10 seconds, remove the cover sheet and carefully try to peel up the clear vinyl cover sheet. If it peels up easily, remove it. If the vinyl is pulling up, place the clear vinyl cover layer back down and repeat pressing for 5-7 seconds. Repeat this process until the vinyl adheres to the faux leather well.
Repeat this process with the other vinyl layers.
Then cover both earrings with your Teflon cover sheet or parchment paper and press one more time, for about 5 seconds. This makes sure all the layers are pressed well to the faux leather, and each other.
STEP 8 – Attach the Jump Rings and Earring Hooks
Now it’s time to attach the earrings hooks.
You’ll need two jump rings, earring hooks, and two pairs of flat nose pliers. I use 6mm jump rings.
I like to twist the bottom loop of the earring hook 90 degrees first so the faux leather earrings hang straight.
For more details and step by step instructions on how to do that, you can watch my YouTube video here.
Then use the two pliers to open the jump rings and connect the faux leather earring shapes to the earring hooks. Close the jump rings tightly to keep the earrings secure.
That’s it! Your Christmas Angel Earrings made with faux leather and a Cricut are complete!
If you made these earrings, I would love to see them! Please share them in my Free Cricut Crafting Facebook group, Get Crafty with Amy Romeu. You can request to join here.
Cricut Faux Leather Angel Earrings
- See blog post for materials & links.
- See blog post for tools & links.
- Download and unzip the earring SVG folder. Upload the SVG file to Cricut Design Space.
- On the canvas you will see two versions of the earring SVG - one with pre-cut earring holes and one without. Decide which version you will cut and delete the other version. You will need to UNGROUP the shapes before you can delete individual shapes or layers.
- I don't recommend sizing these earrings any smaller. The halo is tiny and the wings have a delicate swirl design that will be very difficult to weed if it was any smaller. Click the MAKE IT button.
- When Design Space asks how you will load the materials for this project, select ON MAT.
- In the mat preview screens, click on every mat and toggle the mirror button to ON. (This is for when you are cutting faux leather and heat transfer vinyl for the project. If you are using faux leather and permanent vinyl instead, only mirror the faux leather mat.)
- Now return to each mat and drag the shapes apart from the edges and each other slightly. Make a note of what size material you'll need to cut to place on the mat and cut the shape completely.
- When you've done this for each mat, click back on the faux leather mat. Click CONTINUE.
- I like to cut the faux leather mat first. Choose Faux Leather (Paper Thin) as the material setting. If you don't have this setting selected, click "Browse All Materials" and search for it. (On the Explore Air 2, turn your dial to Custom so you can see the Faux Leather material choice.) Then choose "more" from the Pressure drop down menu.
- Trim a piece of faux leather to the size you noted in the mat preview screen. Place it "pretty" side down on a sticky purple strong grip mat. Tape the faux leather down on all sides with blue painter's tape.
- Load the mat into the Cricut and press the C button to begin the cut. When the cut is complete, BEFORE unloading the mat, use a sharp object like a weeding tool to lift up the corner of a cut to see if it went all the way through. If it did, unload the mat. If not, repeat the cut by pressing the C button again. On a Joy, you'll repeat the cut by clicking on "Rerun" on the screen in Design Space.
- Remove the cut shapes from the mat. Trim away any fuzz with small sharp scissors. Color the edges of the faux leather if desired with a color coordinated Sharpie marker.
- Return to Design Space and cut any vinyl mats using a green standard grip cutting mat. Place heat transfer vinyl shiny side down. I use the Vinyl setting or the Washi Sheet setting with "default" pressure for regular heat transfer vinyl. I use the Glitter Vinyl setting with "default" pressure for glitter heat transfer vinyl and I repeat the cut once if the glitter is thick (Siser brand). For permanent vinyl, I use the Vinyl setting with "default" pressure (make sure mats are NOT mirrored).
- Weed away the excess vinyl and cut the vinyl shapes apart.
- Using a Cricut EasyPress Mini set on the "low" setting or an EasyPress set to 265 degrees, press the heat transfer vinyl layers onto the faux leather base one at a time. Refer to the Layers Guide in the tutorial for the pressing order. Place the first vinyl layer onto the faux leather and cover with a cover sheet - Teflon sheet, butcher paper or parchment paper. Then press for 5-10 seconds. Remove the cover sheet and try to peel away the clear vinyl carrier sheet. If the vinyl lifts up, replace the clear carrier sheet and cover sheet and press again for 5-7 seconds.
- After the first vinyl layer is pressed, press each additional layer following the directions above. Once all layers are pressed, cover the earrings with the cover sheet and press once more for 3-5 seconds.
- If you are using traditional shepherds earring hooks, turn the earring hooks 90 degrees with pliers first so the earrings hang straight. Then connect the earring and the earring hook using a 6mm jump ring.
These earrings are soo beautiful!!
I’m so glad you like them, Brenda! Thank you for sharing!