Make Faux Leather Nativity & Holy Night Earrings with a Cricut
I love using teardrop shapes to make simple yet pretty holiday faux leather earring designs. These Nativity & Holy Night Earrings are so easy to make with faux leather and heat transfer vinyl. You can make them with a Cricut Maker, Maker 3, Explore Air 2 or Explore 3, or even the Cricut Joy.
This SVG is included in my Christmas Earrings Event SVG Bundle – you can learn more and get it here.
I also have the earring SVG template for sale individually in my shop – the link is in the Materials section below.
So if you’re ready to try making these Faux Leather Nativity & Holy Night Earrings with a Cricut, let’s get started!
This page contains some affiliate links (which means if you make a purchase after clicking a link, I will earn a small commission at no additional cost to you). Read my full disclosure policy here.
CRICUT NATIVITY & HOLY NIGHT EARRINGS EARRINGS MATERIALS LIST
- Smooth Faux Leather in Sky Blue and Royal Blue
- Heat Transfer Vinyl in Glitter Old Gold (I used Siser brand)
- Heat Transfer Vinyl in White (I used Siser Easyweed)
- This SVG is part of my 25 Days of Cricut Christmas Earrings Event. To see all of the earring designs included in this event, click here.
- Get the earring template from my shop here. If you’d like to sell earrings made from my earrings SVG template, there are commercial use license options available at this link, too.
- Cricut machine of your choice: Cricut Maker 3, Cricut Maker, Cricut Explore 3, Cricut Explore Air 2, or the Cricut Joy
- Purple “Strong Grip” cutting mat
- Green “Standard Grip” cutting mat
- Blue Painter’s Tape
- Cricut EasyPress Mini
- Cricut EasyPress Mat, 8×10 size
- Teflon Sheets (I trim mine down to a smaller size)
- Cricut Weeding Tool (I use the one from this basic tool set)
- 1/16″ Hole Punch
- Jewelry Pliers – Needle Nose and Wide Flat Nose
- Earring hooks in Silver finish and Gold finish
- 6mm Jump Rings in Silver finish and Gold finish
How to Make Faux Leather Nativity & Holy Night Earrings with a Cricut
For a printable version of the text portion of project instructions, click here.
STEP 1 – Get the Earrings SVG Template
You can get the Nativity & Holy Night Earring SVG templates included in the 25 Days of Cricut Christmas Earrings Event Bundle here or from my shop here. You’ll receive an order confirmation email with a link to download the SVG after purchasing.
Save the zipped folder that downloads to your computer. You’ll need to unzip or extract the folder FIRST so you can upload the Nativity & Holy Night Earrings SVG file to Cricut Design Space.
STEP 2 – Upload The Earrings SVG Template to Cricut Design Space
Click on Upload Image, then browse to where your unzipped file SVG is located on your device.
Click on it to upload it to Design Space. You’ll see a preview of the Nativity & Holy Night Earrings SVGs on the screen. Click the UPLOAD button.
Then select the SVGs from your Recent Uploads row and click Add to Canvas.
There will be two versions of the earring SVGs – one with pre-cut holes and one without. Decide which versions you want to use and delete the other ones. You will need to ungroup both versions from each other first before you can delete.
I suggest using the “no-holes” version if you want to change the size of the earrings or if you prefer making the holes manually using a hole punch. If you use the “with holes” version, you can always finish making the earring hole with a hole punch if the Cricut doesn’t cut the hole completely.
I have a YouTube video all about earring holes if you want more information about faux leather earring holes or you need help deciding which version you want to use.
Normally I only show making one earring design at a time, but both of these designs are simple and made from similar materials that I’m going to show you how to cut both at once in this tutorial.
Once you only have only one earring pair for each design on your canvas, you can use the Color Sync feature to save time cutting by placing layers that will cut from the same material (but different colors) on the same mat.
Click on Color Sync above the layers panel. You’ll see each layer in the design broken down by color. Click on a layer that will cut from the same material as another layer and drag it up to the other color.
Since I’m using faux leather in different colors for the teardrop earrings, I dragged the light blie layers up to the dark blue layers. It doesn’t matter which color you drag.
Your mat will look like this. This will change the colors in your design, too, but don’t worry. You will still cut the layers from different colors.
It isn’t necessary to resize the earrings. Click the green “Make It” button.
STEP 3 – Prepare to Cut Earring Shapes in Cricut Design Space
When Design Space prompts you to choose how you will load your materials for this project, choose “On Mat.”
See the graphic below to know which layer will cut from what material. I used white regular heat transfer vinyl for the white layers on both earrings, so those layers would be easy to weed. I used glitter gold heat transfer vinyl for the gold star.
The mat preview screen will show both mats for this faux leather earrings project, separated by color on the left hand side.
First, toggle the MIRROR button to ON for all the mats in the project. This is because faux leather and heat transfer vinyl cut face down. (If you are using permanent vinyl instead of heat transfer vinyl, don’t mirror the mats you plan to cut from permanent vinyl).
On each mat preview, click and drag the shapes apart from each other just slightly.
Then click back on the faux leather mat to select it. Click the green CONTINUE button to make the first material selection.
STEP 4 – Make Material Selections
Note for Explore Air 2 users: Cricut Explore Air 2 users will need to turn the dial to “Custom” before choosing Faux Leather (Paper Thin).
Note for Cricut Joy users: Cricut Joy users should check out my tutorial on How to Make Earrings with the Cricut Joy with more specific instructions for Joy users.
I always cut the faux leather mat first.
On the Material Selection screen, choose Faux Leather (Paper Thin) as the material setting. If you don’t have this material setting as a favorite, click “Browse All Materials” to search for it and select it.
Then select “More” from the Pressure dropdown menu.
Now it’s time to prepare the faux leather mat to cut.
STEP 5 – Cut the Faux Leather Mat
NOTE: I didn’t put a backing on these faux leather earrings in this tutorial to keep it as short as possible. But I do have a post here and a YouTube video here that demonstrate four ways to put a back on faux leather earrings if you want to learn more.
Cut two pieces of faux leather just slightly larger than the sizes shown in the mat preview screen.
Place each piece pretty side down on a sticky purple cutting mat in the same locations shown in the mat preview screen.
Tape the faux leathers down on all sides with blue painter’s tape.
Make sure the white “star wheels” on the roller bar are pushed off to the side so the wheels don’t make indentations in your material.
Load the mat into the Cricut by lining up the mat with the guides and pressing the double arrows button. The machine will pull the mat into the machine.
Press the C button to begin the cut.
After the cut is complete and before unloading the mat, use a weeding tool to carefully lift the edge of the faux leather shapes to see if the cuts were complete.
If not, press the C button again to repeat the cut.
Unload the mat and remove the earring shapes. You can trim any stray fuzz with small curved scissors.
If the Cricut didn’t cut the holes all the way through, use a sharp object like a weeding tool to clean out the hole. You can also use a 1/16″ hole punch to make the hole.
If you want to cover up the white edge of the faux leather, you can color the edges with a coordinating color Sharpie marker.
STEP 6 – Cut the Vinyl Mats
Next, cut the vinyl mat. In Cricut Design Space, on the left hand mat preview, click on the white vinyl mat.
Reminder: if you are using heat transfer vinyl, be sure the MIRROR toggle is turned on. This design features TEXT which must be mirrored. For permanent vinyl, leave MIRROR off.
Drag the two design layers apart slightly to make the shapes easier to weed and cut apart.
You can use your mouse to hover over the mat to make a note of the size vinyl you need to cut out the shapes completely. I like to use a small piece of vinyl trimmed just larger than the shapes that need to cut.
Choose your material setting according to the vinyl type you are using. I use “Vinyl” or “Washi Sheet” for regular HTV with “default” pressure.
Place the heat transfer vinyl(s) you plan to cut shiny side down on a green standard grip cutting mat in the location shown on the mat preview screen.
Load the green mat into the Cricut and press the C button to begin the cut.
When the cut is complete, unload the mat and weed away the excess vinyl using a weeding tool.
Repeat for the gold star mat. I’m using Glitter heat transfer vinyl and the Glitter Vinyl setting with Default pressure.
NOTE: If you are using Siser Glitter heat transfer vinyl for any of your layers, I recommend repeating the cut once by pressing the C button again before unloading the mat.
STEP 7 – Press the Vinyl to the Faux Leather Earring Shapes
I press vinyl to faux leather using a Cricut EasyPress Mini on the “low” setting (one green bar). You can also use a traditional EasyPress set to 255-265 degrees.
Place all of your earring layers on your heat pressing pad. Make sure the vinyl shapes are trimmed apart from each other.
It’s important to have a heat pressing pad to protect your surface, as well as a cover sheet of some kind to put between the heat and your materials. You can use a piece of parchment paper, butcher paper, or a Teflon sheet.
Place the faux leather shape on the pressing pad and layer the vinyl on top. Cover with a cover sheet and press for 7-10 seconds. You can move the EasyPress Mini around like an iron if you’d like to.
After 10 seconds, remove the cover sheet and carefully try to peel up the clear vinyl cover sheet. If it peels up easily, remove it. If the vinyl is pulling up, place the clear vinyl cover layer back down and repeat pressing for 5-7 seconds. Repeat this process until the vinyl adheres to the faux leather well.
Repeat the layering and pressing process for the white vinyl layer for the O Holy Night earrings. Be sure you place the text low on the teardrop like I’ve shown in the sample because you need to leave room for the star above.
Repeat the pressing process with the other earrings until both sets are made.
Then cover each set of earrings one at a time with your Teflon cover sheet or parchment paper and press one more time, for about 5 seconds.
STEP 8 – Attach the Jump Rings and Earring Hooks
Now it’s time to attach the earrings hooks.
You’ll need four jump rings, earring hooks, and two pairs of flat nose pliers. I use 6mm jump rings.
I like to twist the bottom loop of the earring hook 90 degrees first so the faux leather earrings hang straight.
For more details and step by step instructions on how to do that, you can watch my YouTube video here.
Then use the two pliers to open the jump rings and connect the faux leather earring shapes to the earring hooks. Close the jump rings tightly to keep the earrings secure.
That’s it! Your Nativity & Holy Night Earrings made with faux leather and a Cricut are complete!
If you made these earrings, I would love to see them! Please share them in my Free Cricut Crafting Facebook group, Get Crafty with Amy Romeu. You can request to join here.
Cricut Faux Leather Nativity & Holy Night Earrings
- See blog post for materials & links.
- See blog post for tools & links.
- Download and unzip the earring SVG folder. Upload the SVG file to Cricut Design Space.
- On the canvas you will see two versions of the earring SVG - one with pre-cut earring holes and one without. Decide which version you will cut and delete the other version. You will need to UNGROUP the shapes before you can delete individual shapes or layers.
- It isn't necessary to resize the earrings. Click the MAKE IT button.
- When Design Space asks how you will load the materials for this project, select ON MAT.
- In the mat preview screens, click on every mat and toggle the mirror button to ON. (This is for when you are cutting faux leather and heat transfer vinyl for the project. If you are using faux leather and permanent vinyl instead, only mirror the faux leather mat.)
- Now return to each mat and drag the shapes apart from the edges and each other slightly. Make a note of what size material you'll need to cut to place on the mat and cut the shape completely.
- When you've done this for each mat, click back on the faux leather mat. Click CONTINUE.
- I like to cut the faux leather mat first. Choose Faux Leather (Paper Thin) as the material setting. If you don't have this setting selected, click "Browse All Materials" and search for it. (On the Explore Air 2, turn your dial to Custom so you can see the Faux Leather material choice.) Then choose "more" from the Pressure drop down menu.
- Trim a piece of faux leather to the size you noted in the mat preview screen. Place it "pretty" side down on a sticky purple strong grip mat. Tape the faux leather down on all sides with blue painter's tape.
- Load the mat into the Cricut and press the C button to begin the cut. When the cut is complete, BEFORE unloading the mat, use a sharp object like a weeding tool to lift up the corner of a cut to see if it went all the way through. If it did, unload the mat. If not, repeat the cut by pressing the C button again. On a Joy, you'll repeat the cut by clicking on "Rerun" on the screen in Design Space.
- Remove the cut shapes from the mat. Trim away any fuzz with small sharp scissors. Color the edges of the faux leather if desired with a color coordinated Sharpie marker.
- Return to Design Space and cut any vinyl mats using a green standard grip cutting mat. Place heat transfer vinyl shiny side down. I use the Vinyl setting or the Washi Sheet setting with "default" pressure for regular heat transfer vinyl. I use the Glitter Vinyl setting with "default" pressure for glitter heat transfer vinyl and I repeat the cut once if the glitter is thick (Siser brand). For permanent vinyl, I use the Vinyl setting with "default" pressure (make sure mats are NOT mirrored).
- Weed away the excess vinyl and cut the vinyl shapes apart.
- Using a Cricut EasyPress Mini set on the "low" setting or an EasyPress set to 265 degrees, press the heat transfer vinyl layers onto the faux leather base one at a time. Refer to the Layers Guide in the tutorial for the pressing order. Place the first vinyl layer onto the faux leather and cover with a cover sheet - Teflon sheet, butcher paper or parchment paper. Then press for 5-10 seconds. Remove the cover sheet and try to peel away the clear vinyl carrier sheet. If the vinyl lifts up, replace the clear carrier sheet and cover sheet and press again for 5-7 seconds.
- After the first vinyl layer is pressed, press each additional layer following the directions above. Once all layers are pressed, cover the earrings with the cover sheet and press once more for 3-5 seconds.
- If you are using traditional shepherds earring hooks, turn the earring hooks 90 degrees with pliers first so the earrings hang straight. Then connect the earring shapes and the earring hook using 6mm jump rings.
Thank you sooo much for the 25 Days of Christmas Earrings!!!
You are incredibly creative and talented! I’ve enjoyed the anticipation of each day’s project.
I appreciate the new Cricut skills you’ve taught in your earring tutorials too.
I hope you have a relaxing, joyous holiday season! You’ve earned a break!
Thank you, Amy, you have given me so many ideas for family gifts. The only problem is I want to make them all! As it is I’m keeping my fingers crossed the faux leather I ordered gets here in time.
Wow, Amy! What a way to end this awesome event!!! This nativity design is so beautiful. I can’t wait to make them.