How to make a Faux Leather Holiday AirTag Holder with a Cricut

This festive Faux Leather Holiday AirTag Holder is so fun and easy to make with a Cricut!
The holder closes with a Kam Snap so it’s easy to insert and remove the AirTag as needed.
It’s perfect for keeping track of your keys, purse, or luggage during the holidays!
The SVG file is available in my shop if you want to make this project!
Ready to get started? Let’s dive into the materials and steps!
Step 1: Get the SVG Template
Step 2: Shop the Supplies
This page contains some affiliate links (which means if you make a purchase after clicking a link, I will earn a small commission at no additional cost to you). Read my full disclosure policy here.
Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra
Not Compatible Machines❌: Cricut Joy or Cricut Joy 2
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure
- Faux Leather
- I used a Candy Cane print similar to this one. Order a 9×12 sheet, Tiny Scale, Portrait Orientation.
- I used Siser Glitter heat transfer vinyl in Red.
- Other Project Supplies
- Size 20 Kam Snaps with Kam Snap Pliers
- Keychain Hardware of your choice. I used these large swivel clips hooks but you could use a regular split ring keyring instead.
- Fabric glue like Beacon Fabri-Tac or a gel formula super glue like this Loctite Gel Super Glue.
- Other Cricut Supplies
- Blue Painters Tape
- Small Curved Scissors
- Purple Strong Grip Mat
- Green Standard Grip Mat
- Cricut EasyPress Mini for the inside tray decoration
- Heat Pressing Pad
- Cover sheet like a Teflon Sheet, butcher paper or parchment paper
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
🛒 To shop many of these supplies below in my Amazon storefront, click here.
Step 3: Make the Project
Set Up Your Design
- Open a new canvas in Cricut Design Space.
- Upload the Holiday AirTag Holder SVG file to your canvas.
- Click the Make It button.
Prepare to Cut
- Mirror your mats, since you’ll be cutting the faux leather face down.
- Choose the Faux Leather (Paper Thin) setting with More pressure.
Cut the Faux Leather
- Place the faux leather pretty side down on a Strong Grip (purple) mat.
- Secure all edges with blue painter’s tape.
- Load the mat into your Cricut.
- Press the C button to begin cutting.
- When the cut is complete, without unloading the mat, use a sharp tool to gently lift the edge and check the cut.
- Repeat the cut if necessary by pressing the cut button again.
- Once the cut is complete, unload the mat and remove the faux leather shapes.
- Return to Design Space and cut the heat transfer vinyl mat using the recommended cut settings for the brand and type of heat transfer vinyl.
Press the Heat Transfer Vinyl
- Preheat an Easy Press to 265 degrees or set an Easy Press Mini to the Low setting.
- Place the oval AirTag holder layer (not the one with the tab flap) pretty side up on a heat pressing pad.
- Layer the heat transfer vinyl bow layer in the center of the holder shape.
- Doublecheck that when the tab is folded over from the backside that the tab doesn’t cover the bow.
- Then cover the bow with a Teflon sheet or cover sheet and press for 5-7 seconds.
- Remove the Teflon sheet and try to peel away the clear vinyl cover sheet. If the vinyl lifts up with the cover sheet, place it back down and press again.
- After pressing, place the warm faux leather shape underneath the heat pressing pad to cool flat.
Attach the Hardware & Kam Snaps
- Thread the holder hardware onto the tab part of the faux leather holder.
- Gather your Size 20 Kam Snaps and Kam Snap pliers.
- Using Kam Snap pliers, attach the Kam snaps to both layers of the holder. Do this now because it will be harder to apply the Kam Snap to the front of the holder after it’s been glued.
- See the Installation Graphic in your download folder to see which four snap pieces you need to create one snap and place them on your work surface.
📺You can watch a video tutorial that shows how to apply Kam Snaps in a different project here.
Glue the Holder
- To glue the holder, spread a thin line of fabric glue or quick drying glue around the edges of the holder shape. Only glue about ⅔ of the way up the sides.
- Place the other half onto the glued shape and line up the edges. Press the glued edges with your fingers.
- Carefully wipe away any excess glue from the edges. Then place the glued holder under something heavy like a book for at least an hour to dry flat.
- Insert an AirTag and snap the holder closed. That’s it!
Your Holiday AirTag Holder is complete! Take it on your holiday travels to keep track of your keys, purse, or luggage!

Answers to your questions about making a Faux Leather Holiday AirTag Holder with a Cricut
Q: Which Cricut machines will cut faux leather?
A: You can cut faux leather with any of the current Cricut machines because they all cut faux leather with the standard fine point blade included with each machine. For this project you can use the Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore 5, Cricut Explore 4, Cricut Explore 3, Cricut Explore Air 2, the Cricut Joy Xtra, the Cricut Joy or the Cricut Joy 2.
Q: What glue do I use with faux leather?
A: I like to use Beacon Fabri-Tac for gluing faux leather because it spreads thinly and evenly without clumps and it doesn’t absorb into the faux leather. It also cleans up easily with just a finger wipe or a paper towel. It dries nice and flat for a very smooth finish. For this project you could also use a gel super glue like Loctite Gel Control super glue.
Q: How do I get the SVG template for this project?
A: Get the SVG file from my SVG Shop here.
More faux leather projects you’ll love
Until next time… and happy creating!

Pin this project to your favorite Pinterest board!

Want instant access to my Free Resource Library full of SVG files?
Just Enter your name and email Below!
By signing up, you’ll get instant access to my FREE SVG Library with hundreds of crafting SVG templates! You’ll also get my weekly newsletter full of crafting ideas, tutorials, and inspiration! Unsubscribe anytime.




