Supplies List for the Home for the Holidays Crafting Event
This list contains all the supplies and materials I used to create the faux leather projects featured in the Home for the Holidays Faux Leather Crafting Event.
Need a free ticket to the event? Get one here or click the button below:
A note about these supply lists:
These lists are designed to be helpful for you as you craft along with the Home for the Holidays Crafting Event – you can absolutely use any colors you’d like!
Use your imagination and take my samples as a starting point.
Use materials you have on hand and shop for additional colors and patterns you love to create truly original earrings from the event SVG templates.
Would you like to shop all the faux leathers Amy uses from the Polka Dotted Peach in this event? Click here.
If something I link to is out of stock, please don’t let that discourage you from crafting a project you’ll love – but feel free to send me an email at [email protected] if you’d like me to suggest a replacement.
TIP: You can also use heat transfer vinyl to “create” a color of faux leather you don’t have. You can see how I do this in this video on my YouTube channel.
This page contains some affiliate links (which means if you make a purchase after clicking a link, I will earn a small commission at no additional cost to you). Read my full disclosure policy here.
Home for the Holidays Event Project Supplies By Day
Day 1 – Gingerbread House Clutch
Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra (will need to size the pattern down a little to fit)
Not Compatible Machines❌: Cricut Joy
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure
- Faux Leather
- Faux leather in a Gingerbread brown (the Amazon ones may be sold out already):
- This brown from Amazon, a 12 inch wide roll.
- This brown from Amazon, a 7.8 inch wide roll.
- This gingerbread brown from the Polka Dotted Peach, a 9×12 inch sheet.
- Heat Transfer Vinyl
- Other Project Supplies
- Craft or fabric glue like Beacon Fabri-Tac (optional)
- 6mm x 6mm rivets and rivet tools (usually included)
- Size 20 Kam Snaps in White and Kam Snap Pliers (also available in this kit with pliers here)
- Teflon Sheet
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Blue Painters Tape
- Small Curved Scissors
- Other Cricut Supplies
🛒To shop the supplies I used for this project in my Amazon storefront, click here.
BONUS DESIGN INSIDE THE VIP PASS
Gingerbread Cookie Purse Charm
This bonus design & printable instructions are available exclusively inside the Event VIP Pass.
Supplies used for this project (in addition to those listed above) are:
- Split Ring Keyring (I used these 30mm ones)
- 10mm Jump Rings
- Faux Suede Tassel (optional)
Day 2 – Holiday Coffee Cup Holders
Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra, Cricut Joy (with the 12 inch long mat)
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure
- Faux Leather
- Faux leather of your choice. I used these prints from The Polka Dotted Peach: Red Classic Plaid, Pink Candy Cane Stripe, Dark Green Solid.
- Heat Transfer Vinyl
- Other Project Supplies
- Size 20 Kam Snaps with Kam Snap Pliers
- You can also use thin Velcro dots like these
- Teflon Sheet
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Blue Painters Tape
- Small Curved Scissors
- Other Cricut Supplies
🛒To shop the supplies I used for this project in my Amazon storefront, click here.
BONUS DESIGN INSIDE THE VIP PASS
Holiday Coffee Cup Sleeves
This bonus design & printable instructions are available exclusively inside the Event VIP Pass.
Supplies used for this project (in addition to those listed above) are:
- Christmas Plaid faux leather
- Gingerbread Bows faux leather
- Evergreen Gingerbread faux leather
- You’ll want to be sure to order these prints in LANDSCAPE orientation! (I ordered 9×12 size and Regular scaling.)
Day 3 – Layered Poinsettia Keychain
Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra, Cricut Joy (with the 12-inch Joy mat)
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure
- Faux Leather
- Any faux leather you choose. For the red version I used this Red Plaid, this Deep Red Glossy Glitter, and this solid Red. For the White version, I used this White Plaid, this White Glossy Glitter and this White Embossed print.
- I buy 9×12 inch size, Portrait Orientation, Regular Scaling but you can choose whatever options you’d like!
- Heat Transfer Vinyl
- Whatever you want to use for the flower center! I used Siser Glitter In Old Gold.
- Other Project Supplies
- 8mm colored rivets or 8x10mm colored rivets or metal 6mm rivets and hammer (or craft or fabric glue like Beacon Fabri-Tac).
- Large Lobster Claw Clasp Keychains
- Jewelry Making Pliers (Baby Wubbers Chain Nose and Baby Wubbers Flat Nose are my favorites)
- 10mm Jump Rings
- Faux Suede Tassels in Silver finish and Gold finish
- Blue Painters Tape
- Small Curved Scissors
- Other Cricut Supplies
🛒To shop the supplies I used for this project in my Amazon storefront, click here.
BONUS DESIGN INSIDE THE VIP PASS
Layered Snowflake Keychain
This bonus design & printable instructions are available exclusively inside the Event VIP Pass.
Supplies used for this project (in addition to those listed above) are:
Day 4 – Stocking Gift Card Holders
Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra
Not Compatible Machines❌: Cricut Joy
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure
- Faux Leather
- I used these prints from The Polka Dotted Peach:
- Red & Green Santa Trellis
- Red & Green Cameo
- Green & Red Plaid Tree
- I ordered 9×12 size, Portrait, and Regular scale.
- I used these prints from The Polka Dotted Peach:
- Heat Transfer Vinyl (optional)
- I used Siser Easyweed in Dark Green for the names and Siser Glitter HTV in White for the top of the stocking.
- Other Project Supplies
- The font of your choice. I used three free fonts from dafont.com:
- Fabric Glue like Beacon Fabri-Tac
- Teflon Sheets
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Blue Painters Tape
- Small Curved Scissors
- Other Cricut Supplies
🛒To shop the supplies I used for this project in my Amazon storefront, click here.
BONUS DESIGNS INSIDE THE VIP PASS
Stocking Gift Card Holders
These bonus designs & printable instructions are available exclusively inside the Event VIP Pass.
Supplies used for this project (in addition to those listed above) are:
- Solid Red faux leather and this Santa print (9×12, Portrait, regular scale).
- I used Siser Easweed HTV in White and Black and Siser Glitter HTV in Old Gold and White.
Day 5 – Holiday House Ornament
Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra, Cricut Joy
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure
- Faux Leather
- Use any solid or printed faux leather you’d like. I used this Mint solid faux leather.
- Heat Transfer Vinyl
- Any HTV you’d like – I used Siser Easyweed in White, Black, Siser Glitter Heat Transfer Vinyl in Red, and TeckWrap Foil Iron On in Chrome.
- Other Project Supplies
- Fabric Glue like Beacon Fabri-Tac
- Teflon Sheets
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Blue Painters Tape
- Small Curved Scissors
- Other Cricut Supplies
🛒To shop the supplies I used for this project in my Amazon storefront, click here.
BONUS DESIGN INSIDE THE VIP PASS
Gingerbread Cookie Ornaments
These bonus designs & printable instructions are available exclusively inside the Event VIP Pass.
Supplies used for this project (in addition to those listed above) are:
- Gingerbread brown faux leather. (The Amazon ones may be sold out):
- This brown from Amazon, a 12 inch wide roll.
- This brown from Amazon, it is a 7.8 inch roll.
- This gingerbread brown from the Polka Dotted Peach, a 9×12 inch sheet.
- Heat Transfer Vinyl of your choice. I used Siser Easyweed in White and Siser Glitter HTV in Red and Grass Green.
Day 6 – Santa Bow Purse Charm
Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra, Cricut Joy (with the 12 inch Joy mat)
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure
- Faux Leather
- Faux leather of your choice. I used this solid Red and this solid Black from The Polka Dotted Peach.
- Heat Transfer Vinyl
- Other Project Supplies
- Fabric Glue like Beacon Fabri-Tac
- Hot Glue – I used the Surebonder Mini Cordless Glue Gun and Mini Gorilla Glue Sticks
- 1 inch wide Swivel Lobster Claw Clasp in Gold or Silver
- 6mm x 6mm rivet and rivet tools (rivet is optional – tools usually included)
- Teflon Sheet
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Blue Painters Tape
- Small Curved Scissors
- Other Cricut Supplies
🛒To shop the supplies I used for this project in my Amazon storefront, click here.
BONUS DESIGN INSIDE THE VIP PASS
Gingerbread Bow Purse Charm
This bonus design & printable instructions are available exclusively inside the Event VIP Pass.
Supplies used for this project (in addition to those listed above) are:
- Gingerbread brown faux leather. (The Amazon ones may be sold out):
- This brown from Amazon, a 12 inch wide roll.
- This brown from Amazon, a 7.8 inch wide roll.
- This gingerbread brown from the Polka Dotted Peach, a 9×12 inch sheet.
- Siser Easyweed in White
Day 7 – Holiday Bow Earrings
Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra, Cricut Joy
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure
- Faux Leather
- Any prints, patterns or solids you’d like to use! I used:
- Candy Cane Earrings – Fireball Glossy for the bow and Pink Candy Cane Stripes for the candy cane
- Ornament Earrings – 24K Gold Glossy for the bow and Gingerbread Stripes for the ornament
- Wreath Earrings – Envy Glossy for the bow and Emerald Gingerbread for the wreath
- Snowflake Earrings – Ocean Bliss Glossy for the bow and this Snowflake print for the snowflake
- I buy 9×12 inch size, Portrait Orientation, Regular Scaling but you can choose whatever options you’d like!
- Any prints, patterns or solids you’d like to use! I used:
- Other Project Supplies
- Earring Hooks (also available in Silver finish)
- 6mm Jump Rings (also available in Silver finish)
- Teflon Sheet
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Blue Painters Tape
- Small Curved Scissors
- Other Cricut Supplies
BONUS DESIGN INSIDE THE VIP PASS
Holiday Bow Earrings
These bonus designs & printable instructions are available exclusively inside the Event VIP Pass.
Supplies used for this project (in addition to those listed above) are:
- Bell Earrings – 24K Gold Glossy for the bow and this Cream Gold Plaid for the bell.
- Gingerbread Man Earrings – White Glossy for the bow and Gingerbread Stripes for the cookie.
- Star Ornament Earrings – Red Glossy for the bow and Pink Candy Cane Stripes for the ornament.
- Tree Earrings – Envy Glossy for the bow and this Green & Red Plaid for the tree.
- For all faux leather prints, I ordered 9×12 size, Portrait orientation, and Regular scaling.
Day 8 – Project Revealed on December 8th
Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra
Not Compatible Machines❌: Cricut Joy
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure
- Faux Leather
- Use any faux leather you like as long as it’s at least 9 inches x 12 inches. The print should either be a directionless print (like the one I used here – link available soon) or you should order your desired print in Landscape format.
- Heat Transfer Vinyl
- Other Project Supplies
- Kam Snaps, Size 20 EXTRA LONG and Kam Snap Pliers (available in a few basic colors on Amazon, and in a wide variety of colors on the KamSnap website)
- Lobster Claw Keyrings
- 10mm Jump Rings
- Faux Suede Tassel (optional)
- Teflon Sheets
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Blue Painters Tape
- Small Curved Scissors
- Other Cricut Supplies
BONUS DESIGN INSIDE THE VIP PASS
Poinsettia Card Wallet
This bonus design & printable instructions are available exclusively inside the Event VIP Pass.
Supplies used for this project (in addition to those listed above) are:
- Poinsettia print faux leather (I ordered 9×12 size, Portrait orientation, Regular scale)
- Shades of red heat transfer vinyl. I used Siser Easyweed in Red and Siser Glitter HTV in Red, Burgundy, and Old Gold.
Day 9 – Project Revealed on December 9th
Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra
Not Compatible Machines❌: Cricut Joy
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure
- Faux Leather
- Use any faux leather you like as long as it’s at least 9 inches x 12 inches. You’ll need two sheets or you can use one sheet for the cover and scraps of another print or pattern for the inside pockets. I used a solid white from Amazon or this one from The Polka Dotted Peach.
- Heat Transfer Vinyl
- Other Project Supplies
- Notebook Inserts, 3.5×5.5 inches in size like these or these
- Kam Snaps, Size 20, regular length and Kam Snap Pliers
- Fabric Glue like Beacon Fabri-Tac
- Teflon Sheets
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Blue Painters Tape
- Small Curved Scissors
- Other Cricut Supplies
BONUS DESIGN INSIDE THE VIP PASS
Letter to Santa & Mailbox Earrings
This bonus design & printable instructions are available exclusively inside the Event VIP Pass.
Supplies used for this project (in addition to those listed above) are:
- Faux Leather in Red and White
- Heat Transfer Vinyl in Red, White, and Green
- Earring Hooks
- 6mm Jump Rings
Day 10 – Project Revealed on December 10th
Compatible Machines✅: Cricut Maker, Cricut Maker 3, Cricut Maker 4, Cricut Explore Air 2, Cricut Explore 3, Cricut Explore 4, Cricut Joy Xtra, Cricut Joy
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure
- Faux Leather
- Heat Transfer Vinyl
- Colors of your choice, but I recommend choosing an easy to weed HTV. I used Siser Easyweed in Light Pink, Retro Mint and Pale Blue.
- Other Project Supplies
- Fabric Glue like Beacon Fabri-Tac
- Ribbon of your choice. 3/8″ – 1/4″ is best. I used this set of 1/4 inch ribbon rolls.
- Teflon Sheets
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
- Blue Painters Tape
- Small Curved Scissors
- Other Cricut Supplies
BONUS DESIGN INSIDE THE VIP PASS
Arabesque Tile Ornaments
These bonus designs & printable instructions are available exclusively inside the Event VIP Pass.
Supplies used for this project (in addition to those listed above) are:
- Faux Leather of your choice. I use Glossy White, Glossy Blue, Glossy Green and Glossy Dark Red.
- Heat Transfer Vinyl of your choice. I used Siser Easyweed in Red, Pale Blue, Lime Green, and White.
- Fabric Glue like Beacon Fabri-Tac
- Ribbon of your choice (3/8″ – 1/4″ is best. I used this set of 1/4 inch ribbon rolls.
Need to study this list
I love your projects and have all the supplies! Can’t wait to see and make all this year’s designs!
I have everything I need to make the Day 1, Gingerbread Clutch except larger sizes of Brown Faux Leather
Wow! What fun projects. The supply lists make it easy to have everything on hand by the day the project comes out. Thank you!
Can’t wait to start making these designs. I’ll finally get to use up some of my Christmas themed faux leather from last year too.
Amy, I really enjoy watching your videos. I have looked at the fun faux leather at the Polka Dot Peach. I plan to make some of your amazing designs soon.
This supply list is great. I have some of the supplies already.
Well, I don’t seem to have any of the supplies needed for these projects except for a Cricut Machine (& I don’t even know what kind it is – it was gifted to me recently) but I will look at all the ideas and hopefully get inspired to try at least one of them.
I have all of the supplies for Day 1 and I’M ready to get started.
Hi Amy,
I have some faux leather and the faux suede tassels. I’m excited to see all the projects each day!!
It’s so nice to look at this list ahead of time and see that I already have so many of the supplies already because of doing your other events – and what I don’t have, I can substitute easily with some of the materials I have left over from those events to or only have to spend a little to get started right away!
My granddaughter loves to make the little purses and notebooks so I’ve got most of the supplies handy. She’s going to love doing this gingerbread wristlet!!
All supplies in one place makes it so easy.
I cant wait to get these projects, the gingerbread house little wristlet looks amazing
So excited! Love this event every year!
Thank you for always having such thorough lists and instructions!!!
I have several different colors of faux leather that I can make for some of these projects, along with lots of options for the HTV. These projects are really cute!
I love how easy Amy makes crating. All of the supplies are easy to get and creating is so fun.
This is SO helpful! Thank you!
Amy always has the cutest faux leather crafts, plus they are easy to make.
I have the cricut maker, grip mat, cricut easy press, HTV and a few other things. I’ll have to purchase some snaps.
Thanks for sharing the supply list for the Gingerbread House Clutch.
Thank you for the very detailed supply list and the various links to help with purchasing items online. Super excited for this event and can’t wait to see all the amazing holiday projects.
This is really cute! I love the purse charm!!!
The supplies are easy to buy and use. It’s amazingly easy. Most every crafter probably has all the supplies they need in their stash already.
love how the supply lists are so organized.
Looks like it’s gonna be a lot of awesome projects! Looks like I’m gonna have to do some more shopping.
I love all of the Holiday designs and I am so excited to start crafting!!
Thank you for this event for the holidays!
I am so excited for this event. I have just about all of the supplies needed other than the Christmas themed faux leather which is being ordered soon. I cannot wait to incorporate these items into my gift giving this holiday season. Thanks so much for sharing all of these amazing crafts with us♥!
I have most of the supplies needed for a lot of your projects. Mostly the only thing I am missing is some of the faux leather colors and designs.
The list of supplies are a teaser to keep us coming back. 🙂
Great supply list! Can’t wait to order my supplies and get started on all “the things.”
Your supply list are easy to follow. The fact you can get them anywhere. Amazon is always easy and the Polka Dotted Peach has beautiful prints for the faux leather choices.
I love your designs!
I am that person who LOVES a list to go with a project. Give me a pattern back with all the notions, give me a list like this of all the supplies and I’m very happy. Nothing is worse than deciding on a project, reading the instructions/ watching the video and getting started only to realize you’re missing one super-specific thing and you have to stop, (now that JoAnns closed) order the missing thing or try to figure out if you have a substitute and then wonder if the project would have turned out better IF you’d only had that missing part. But I’m not speaking from experience or anything. So THANK YOU for these detailed supply lists. You’re my hero!
The supply lists are complete and easy to find items!
Love all your designs and the beautiful faux leather you use. Looking forward to making some of your fun projects.
We like being able to get the same colors of material as you used so ours will look like what you show us.
Thank You
I have several different thicknesses of faux leather. How should I set my cricut maker 3 to accommodate them?
Love the designs!
Getting all the supplies ready. Can’t wait to make some amazing projects.
Thanks for such detailed supplies and links!
Thank you so much for the simple, easy to follow supply lists!!!
I have bought a bunch of the items and will definitely try and make stuff for gifts for the holidays.
I got the kam snaps awhile ago thinking I’d start making things this summer…will definitely use it now! Also had to get some key rings for different purpose but when I bought them, thought about all the things I could make that you have taught, so made sure to get the ones I could use for craft projects.
Love how you provide all the supplies and links on where to get them.
Thank you!
I appreciate that a lot of the projects use the same types of tools.
I already have most of the supplies already, but I need to get blue faux leather for the snowflakes!
Thanks for providing these lists. I love that I have so many of the things already!
So many fun projects!!!
These are some cute projects, thank you for putting on a great event
Thank you for providing detailed and easy to follow supply lists and links.
I love that you put these supply lists together and because I’ve been following you for a while, I often already have the items and tools you mention!
Thank you for all that you do. I can’t wait every morning to get to the website and see the reveal. I’ve bought several other classes but this is my favorite so far.
Thank you for all the special effort you put into your crafting events. I’m looking forward to making gingerbread items as I have the vip pass. I found brown faux leather on Amazon from a different seller as the one you suggested was sold out already.
Your designs are always so cute and simple! The instructions and videos are so easy to follow.
Thank you for the comprehensive list of supplies! They enabled me to hunt through what I have to prepare for your projects.
Everything here is so festive. I can’t wait to try some of them!
I have little bit of this and that for the projects, but looks like I need to go shopping!! 😆😆
I have SO many craft supplies that sometimes it’s a challenge to find them; but then I find another project I want to try and find that there are SO many on my “don’t have” list! The links make it easy (maybe too easy) to add to my stash.
I bought all of the supplies that she recommended because they are used in almost every faux leather project.
Thanks for the great supply list. Everything is easy to find and designs easy to follow!
Thank you 👍 for always listening a detailed supply list and where items can be purchased. Y oh are a blessing. Happy crafting!