How to make a Faux Leather Christmas Wristlet with a Cricut

This Faux Leather Christmas Stocking Wristlet made with a Cricut is the perfect holiday accessory!
Have your keys handy all season long with this pretty faux leather wristlet and Christmas stocking charm.
The SVG file is available in my shop if you want to make this project.
Ready to get started? Let’s dive into the materials and steps!
Step 1: Get the SVG Template
Step 2: Shop the Supplies
This page contains some affiliate links (which means if you make a purchase after clicking a link, I will earn a small commission at no additional cost to you). Read my full disclosure policy here.
Compatible Machines✅: Cricut Maker series, Cricut Explore series, Cricut Joy Xtra, Cricut Joy 2, Cricut Joy (with the 12 inch long mat)
Not Compatible Machines❌: none
Blade Used: Standard Fine Point Blade
Cut Setting Used✂️: Faux Leather (Paper Thin) with “More” pressure
- Faux Leather & Heat Transfer Vinyl
- I used prints from this set but you can use any faux leather you’d like. For the print I ordered 9×12 sheets, Regular Print, Portrait Orientation.
- I used Siser Glitter HTV in White.
- Other Project Supplies
- Craft glue or fabric glue to glue the charm together. I used Beacon Fabri-Tac.
- 1 inch Wristlet Hardware with Nylon Jaw Pliers
- 10mm Jump Rings
- Optional charms – I used these bows, these snowflake charms
- Optional mini tassels like these
- Flat nose jewelry pliers and chain nose jewelry pliers
- Other Cricut Supplies
- Blue Painters Tape
- Small Curved Scissors
- Teflon Sheets
- Purple Strong Grip Mat
- Green Standard Grip Mat
- Cricut EasyPress Mini
- Heat Pressing Pad, I use an 8×10 size
- Weeding Tool like a Pin Pen or like the one in the Cricut Basic Tool Set
🛒 To shop many of these supplies below in my Amazon storefront, click here.
Step 3: Make the Project
Set Up Your Design
- Open a new canvas in Cricut Design Space.
- Upload the Christmas Stocking Wristlet SVG to your canvas.
- Decide if you are cutting the tree layer from faux leather or heat transfer vinyl.
Prepare to Cut
- Click Make It.
- Mirror your mat(s), since you’ll be cutting the faux leather and heat transfer vinyl face down.
- Choose the Faux Leather (Paper Thin) setting with More pressure.
Cut the Faux Leather
- Place the faux leather pretty side down on a Strong Grip (purple) mat.
- Secure all edges with blue painter’s tape.
- Load the mat into your Cricut.
- Press the C button to begin cutting.
- When the cut is complete, without unloading the mat, use a sharp tool to gently lift the edge and check the cut.
- Repeat the cut if necessary by pressing the cut button again.
- Once the cut is complete, unload the mat and remove the shapes.
- Repeat cutting the other faux leather mats.
Cut the Heat Transfer Vinyl
- Return to Design Space and cut the heat transfer vinyl mats using the manufacturer’s recommended cut setting for the brand and type of heat transfer vinyl.
- Weed away the excess vinyl.
Press the HTV onto the Faux Leather
- Preheat an Easy Press to 265 degrees or set an Easy Press Mini to the Low setting.
- Place the stocking shape on a heat pressing pad. Layer the stocking detail HTV on top.
- Cover with a Teflon sheet or cover sheet.
- Press for 5-7 seconds. Remove the Teflon sheet and try to peel away the clear vinyl cover sheet.
- If the vinyl lifts up, cover and press again in 5 second increments.
- Repeat with the other stocking layer.
- Press any other layers of HTV (depending on what you’ve chosen to cut from faux leather or HTV).
Glue Charm Together
- Glue the front and back of the faux leather stocking shapes together.
- Place the glued stocking charm under a heavy book for at least an hour to dry flat.
- Then glue the tree shapes to the front and back of the stocking charm with fabric or craft glue.
Assemble the Wristlet
- Fold the faux leather strap in half. Put the ends inside the jaws of the key fob hardware.
- Use rubber tipped pliers to clamp the jaws closed onto the ends of the faux leather strap.
- To attach optional charms and tassels, use flat nose pliers & 10mm jump rings.
Your Christmas Stocking Wristlet is complete! Enjoy this festive holiday accessory all season long.

Answers to your questions about making a Christmas Stocking Wristlet
Q: Which Cricut machines will cut faux leather?
A: You can cut faux leather with any of the current Cricut machines because they all cut faux leather with the standard fine point blade included with each machine. For this project you can use any of the Cricut Maker series machines, the Cricut Explore series machines, the Cricut Joy Xtra, the Cricut Joy 2, or the Cricut Joy. For this project, you’ll need the 12 inch long Joy sized mat.
Q: What do I need to press heat transfer vinyl onto faux leather?
A: To press heat transfer vinyl onto faux leather you’ll need a traditional heat press, Cricut EasyPress, or Cricut EasyPress Mini. I used a Cricut EasyPress Mini for this project because it’s great with pressing small projects like earrings, keychains, and accessories. I set the EasyPress Mini to the Low setting and covered the HTV on the faux leather with a Teflon sheet before pressing for about 10 seconds. For a larger EasyPress I set it to 265 degrees F.
Q: How do I get the SVG template for this project?
A: Get the SVG file from my SVG Shop here.
Also available in my SVG Shop
Until next time… and happy creating!

Pin this project to your favorite Pinterest board!

Want instant access to my Free Resource Library full of SVG files?
Just Enter your name and email Below!
By signing up, you’ll get instant access to my FREE SVG Library with hundreds of crafting SVG templates! You’ll also get my weekly newsletter full of crafting ideas, tutorials, and inspiration! Unsubscribe anytime.




