How to make a Faux Leather Penguin Badge Reel with a Cricut

Share the love!

You can make this project with any of the Cricut Maker, Explore, or Joy machines with just the regular fine point blade.

Step 1: Get the SVG Template

Get the SVG in my Shop

Personal or Small Commercial Use Available

Step 2: Shop the Supplies

This page contains some affiliate links (which means if you make a purchase after clicking a link, I will earn a small commission at no additional cost to you). Read my full disclosure policy here.

Set Up Your Design

  1. Open a new canvas in Cricut Design Space.
  2. Upload the Penguin Badge Reel SVG to your canvas.
  3. Decide if you are cutting the scarf layer from faux leather or heat transfer vinyl.

Prepare to Cut

  1. Click Make It.
  2. Mirror your mat(s), since you’ll be cutting faux leather face down.
  3. Cut the penguin body and scarf shape first.
  4. Choose the Faux Leather (Paper Thin) setting with More pressure.

Cut the Faux Leather

  1. Place the faux leather pretty side down on a Strong Grip (purple) mat.
  2. Secure all edges with blue painter’s tape.
  3. Load the mat into your Cricut.
  4. Press the C button to begin cutting.
  5. When the cut is complete, without unloading the mat, use a sharp tool to gently lift the edge and check the cut.
  6. Repeat the cut if necessary by pressing the cut button again.
  7. Once the cut is complete, unload the mat and remove the shapes.
  8. Repeat cutting the other faux leather mats.

Cut the Heat Transfer Vinyl

  1. Return to Design Space and cut the heat transfer vinyl mats using the manufacturer’s recommended cut setting for the brand and type of heat transfer vinyl.
  2. Weed away the excess vinyl.

Press the HTV onto the Faux Leather

  1. Preheat an Easy Press to 265 degrees or set an Easy Press Mini to the Low setting.
  2. Place one of the faux leather penguin body shapes on a heat pressing pad. Be sure the body you chose has the scarf tail on the LEFT.
  3. Place the white HTV layer onto the penguin body. If necessary, use the yellow foot and nose layer to help you figure out where to place the white layer, or refer to the Layering Guide in the download folder for help.
  4. Cover with a Teflon sheet or cover sheet.
  5. Press for 5-7 seconds. Remove the Teflon sheet and try to peel away the clear vinyl cover sheet.
  6. If the vinyl lifts up, cover and press again in 5 second increments.
  7. Repeat with the foot and nose layer.
  8. Press the scarf layer if you’ve cut that from HTV. If you cut it from faux leather, you’ll wait to glue that one in an upcoming step.

Glue the Penguin Body Together

  1. Glue the front and back of the faux leather shapes together with fabric or craft glue.
  2. Place the glued penguin under a heavy book for at least an hour to dry flat.

Glue the Faux Leather Scarf

  1. Next glue the scarf to the penguin body with fabric or craft glue.
  2. We do this as a separate step because we want the glued penguin body to get full pressure from the heavy book in the previous step which will help us get a really flat result.
  3. Allow the glued scarf to dry for a few minutes.

Glue on the Badge Reel

  1. Glue the badge reel hardware to the back of the penguin shape. I used fast drying gel super glue.
  2. Be sure the pull cord of the badge reel is facing down before the glue sets and you can’t reposition it.

Answers to your questions about making a Penguin Badge Reel

Get the SVG in my Shop

Personal or Small Commercial Use Available

Until next time… and happy creating!

Pin this project to your favorite Pinterest board!

Want instant access to my Free Resource Library full of SVG files?

Just Enter your name and email Below!

By signing up, you’ll get instant access to my FREE SVG Library with hundreds of crafting SVG templates! You’ll also get my weekly newsletter full of crafting ideas, tutorials, and inspiration! Unsubscribe anytime.

Share the love!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.